Print this Page

Throttle Bodies

The AE101 bodies removed from the manifold.

 

Naturally, as the bodies have come from a production vehicle they are of very high quality.

The spacing between bodies on the original engine is 88mm so the original manifold the standard linkage setup had to have enough capacity to be spaced out to the B series 90mm centres between cylinders - this was not a problem.

The throttle cable linkage is of excellent quality, and was one of the attractions of the AE101's. Each body naturally has an individual end stop, and balance adjustment.

The only major problem is that the inlet and outlet flanges are totally non-standard, but you can't have everything.